Power Analyzer

Product Details:

• Type :-Three Phase Ammeter
• Model :-DTA-3
• Display : Three row 4-Digit Bright Red Seven Segment Display
• Measurement : True RMS Measurement
• Microcontroller Based Accurate and Reliable.
• Accuracy : Class 0.5
• Range : 5A/10A/20A AC
• Facility to set the CT ratio.
• Current Transformer is used as a Current Transducer for durability.
• Aux. Supply : 230V + 20% / 110V + 20% AC
• Dimension(mm) : 96 by 96 ( Front)    65 ( Depth).

Additional Information:

• Production Capacity: 1000
• Delivery Time: 2-3

Product Details:

Please Note: Most of the Features are now incorporated in THDPM-1 at more affordable price and compact packing.

Being a customer-oriented enterprise, we are engaged in providing a wide array of Harmonic Single Phase Energy Analyzer.

Other details:

• Single Phase Energy (Power) Analyser (THD measurement meter)
• SPEA-1 is Single Phase Power Analyzer with Harmonics Measurement
• It has various features which are used to analyze the power quality and test single phase devices such as LED Drivers, SMPS, Fans, Inverter, UPS
• It Shows True RMS values of Voltage and Current
• User can also view Average values, Form Factor and Crest Factor of both Voltage and Current Channels
• Data Logging and Production Report generation helps user for complete analysis without computer

Features:

• All Electrical Parameters
• Pass / Fail Facility
• Total Harmonic Distortion in %
• Voltage and Current THD
• Harmonics: Up to 55 order
• Software Provided for report generation
• SD Card: Data logging with settable time
• Production Logging with serial no

Hardware features:

• 6-row Bright LED Display for clear view
• Indication for Hold Facility
• Parameters: Voltage, current, Watt, PF, Frequency, Watt-Hour Measurement
• True RMS, Average, Crest Factor, Form Factor Measurement
• THD of Voltage and Current
• Individual Voltage Harmonics up to 55th level
• Individual Current Harmonics up to 55th level
• Save settings for different kind of devices in meter
• Production Testing: Failed parameter indication in meter
• Software interfacing
• Smart QC Interfacing using RS485 port

For AC & THD Measurement:

• Electrical Parameters (Volt, Current, Watt, PF, Hz, Wh)
• Mode: RMS, AVG, PEAK, CF, FF
• Harmonic: Up to 55 Harmonic Voltage & Current THD
• Harmonics in Value and Percent
• SD Card Storage

For AC & DC Measurement:

• AC Parameters (AC Volt, AC Current, AC Watt, PF, Hz)
• DC Parameters (DC Volt, DC Current, DC Watt, Efficiency)
• Software Compatible

Software Features:

• Dual display mode: SPEA-1 mode and Smart-QC Mode
• Spectrum of Voltage and Current Harmonics
• Unlimited device storage with limits
• Display value turn red when limit cross
• Alarm settings
• Data logging of all parameters with date and time
• Production report generation with pass-fail facility
• Pdf report generation

Testing Bench:

• SD Card Logging with serial number and settable time
• No Requirement of computer for logging

Technical Specifications:

Auxiliary Power	180 - 250 V, 50 Hz
Input Voltage	5.0 – 500V, 45 – 55Hz
Input Current	2.0A (up to 10A range available)
Accuracy	Class 0.2, 1.0 %
Resolution	Floating Decimal Point
Display	Seven Segment Bright LED Display

Product Details:

Being one of the reputed organizations in the market, we are engaged in providing Harmonic Analysis Services.

Other details:

• Rendered in hassle free manner
• Cost effective and timely execution of services
• No hidden charges are applied
• Harmonic Analysis of non-sinusoidal waveform signals using Harmonic Analyzer THDPM-1 and plotting frequency spectrum.
• This test applies on Non Linear Loads.
• We can plot the graphical frequency spectrum of the harmonics in the non-sinusoidal waveform signal using THDPM-1.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1-2

Product Details:

URJA LABH is a useful device to calculate energy cost of connected AC load. It is cheaper, reliable, light weight, Fast operating and easy to handle with simple load terminal connection.

It has a big red LED display to show different AC parameters on different three modes.

In First mode, it meters the load value and shows AC Voltage, Current, Wattage, Power Factor, Frequency and VA rating.

In Second mode, it calculate the cost of connected AC load and shows AC load Wattage, No. of hours, No. of years, Unit cost and Total amount.

In third mode, it calculates total consume units and shows AC load Wattage, Hours, Years and Total Units.

It contain some additional features of Data Logger with Pen-drive (optional) and Internal onboard memory up to 32000 Tests (optional).

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Solar DC Power Analyser (SDPA-3) is a DC(Solar) – DC(Battery) – DC(Load) testing instrument. It is used to measure the parameters of solar power, battery power, and load power consumption.

It tests the quality of solar drivers/DC Converters at production. Its contains a big display to show solar DC parameters Voltage, Current and Wattage in the first row of the display.

In the second row of the display, it shows Battery DC parameters Voltage, Current, Wattage, and efficiency. And in the third row of the display, it shows DC Load parameters Voltage, Current, Wattage, and efficiency.

The USB port and Pen-drive port are also optically isolated with an internal circuit for the safety of the user/operator. It also contains Bar Code facility for fast and easy testing. And generate datasheet with barcode number and measured parameters.

 

The standard current range is 5mA to 10Amp and it’s also customized as per requirement.

Additional Information:

• Item Code: SDPA-3
• Production Capacity: 1000
• Delivery Time: 2 days
• Packaging Details: SDPA meter, Power Cable, Petch codes, Software CD, Pendrive, Manual

Product Details:

Solar Power Analyser is a DC(Solar) – DC(Battery) – DC(Load) testing instrument. It is used to measure the parameters of solar power, battery power, and load power consumption. It tests the quality of solar drivers/DC Converters at production. It contains a big display to show solar DC parameters Voltage, Current and Wattage in the first row of the display. In the second row of the display, it shows Battery DC parameters Voltage, Current, Wattage, and efficiency. And in the third row of the display, it shows DC Load parameters Voltage, Current, Wattage, and efficiency. The USB port and Pen-drive port are also optically isolated with an internal circuit for the safety of the user/operator. It also contains Bar Code facility for fast and easy testing. And generate datasheet with barcode number and measured parameters. The standard current range is 5mA to 10Amp and it’s also customized as per requirement.

Additional Information:

• Item Code: SPA-3
• Production Capacity: 1000
• Delivery Time: 2
• Packaging Details: Solar Power Analyser, USB cable, Pendrive, Power cable, patch code, Software CD, Manual